Our fiberglass reinforced plastic (FRP) or Glass reinforced plastic (GRP) pipes and fittings are designed and made to BS7159. Pipe thickness fabricated according to this code is generally thicker than those ASTM codes such as ASTM D2996 and ASTM D3517.

All pipe and fittings have 2mm thick minimum corrosion barrier. And depending on the type of medium running inside the pipe, we will custom-made the corrosion barrier both in terms of thickness and type of material for every application. We can produce dual laminate pipe and fittings if thermoplastic liner is required for cases where fiberglass liner is not resistant to the chemical.

All standard pipes and fittings are coated with grey pigmented topcoat with UV absorber added into it for protecting the pipe and fittings against the ultra-violet rays. In cases when UV protection and accurate color coding of pipes and fittings is important, we have the flexibility of using polyurethane paint.

Our pipes are used to convey mostly the corrosive medium as they are all custom design and made to meet specific design condition, unlike the standard commodity pipe.

The types of resins we use are:

a. Bisphenol A epoxy vinyl ester resin
b. Novolac epoxy vinyl ester resin
c. Isophthalic polyester reisn

Pipes are produced in standard lengths of:

a. 3m length for size 1-1/2” and below
b. 5m length for size bigger than 2” and above.